HomeContact Us Motor OilFiltersDiesel OilBy PassMotorcycle OilPowersports OilGear LubeTransmission FluidHydraulic OilCompressor OilGrease

Series 2000 Synthetic Racing Grease NLGI #2

AMSOIL Series 2000 Synthetic Racing Grease, NLGI #2, GC/LB (GRG)

CLICK For a Price Quote or Place an Order
Series 2000 Synthetic Racing Grease, NLGI #2AMSOIL Series 2000 Synthetic Racing Grease, NLGI #2, GC/LB (GRG)

Ultimate protection for hard-driven, high performance vehicles. Dramatically reduces friction and wear for improved performance. Excels at both high- and low-temperature performance. Outperforms other conventional and synthetic greases.

AMSOIL Synthetic Racing Grease meets the highest performance standards of the National Lubricating Grease Institute, GC for wheel bearing applications and LB for chassis applications.

Load Capacity
AMSOIL Synthetic Grease is an extreme-pressure multi-purpose grease formulated for high-temperature/high-speed applications. Yet, it excels in the protection of low-speed bearings, a job usually reserved for heavy-duty products. Components get the load bearing capacity of a heavy-duty grease without sacrificing the high-temperature protection of a multi-purpose.

Racing Grease Film StrenthAnti-Wear Performance
AMSOIL Synthetic Racing Grease passes the Ford Film Strength Endurance Test with a 16 point margin (see graph). Most nonsolid-fortified racing greases, synthetic or conventional, do not pass. AMSOIL Synthetic Racing Grease keeps greased components in like-new condition.

All-Temperature Protection
AMSOIL Synthetic Grease pairs a high Viscosity Index synthetic base oil with a top-quality lithium complex thickener, known for its extraordinary performance in temperature extremes. AMSOIL Synthetic Grease offers excellent low-temperature pumpability and high-temperature consistency for dependable all-temperature protection.

Oxidation Resistance and Inhibition
AMSOIL Racing Grease has excellent oxidation resistance and a robust package of oxidation inhibitors prevent grease breakdown and component surface damage in the highly oxidizing conditions associated with high temperature operations.

Friction Reduction
AMSOIL Synthetic Grease maximizes power through-put and fuel efficiency by minimizing friction. The extra power given by Series 2000 improves acceleration and top-end speed.

Washout Resistance and Corrosion Inhibition
AMSOIL Synthetic Grease resists water wash out and inhibits rust and other forms of corrosion.

 

AMSOIL Series 2000 Synthetic Racing Grease - Typical Technical Properties
NLGI
GC-LB
Series 2000
Racing Grease
ThickenerNR*Lithium Complex
NLGI Consistency GradeNR*2 EP
NLGI Performance GradeNR*GC-LB
Penetration (ASTM D-217) 25° C [77° F], 0.1 mm Worked 60 strokes220 - 340265 - 295
Dropping Point (ASTM D-566) °C [77° F]220 [428]285 [545]
Water Washout (ASTM D-1264) 79° C [175° F] % loss15 max5.1
Oil Separation (ASTM D-1742) 24 hr. @ 25° C [77° F], % loss10 max2.8
Rust Protection (ASTM D-1743)passpass
Timken OK Load Test (ASTM D-2509), lbs.NR*60
Fortified with Moly CompoundNR*no
Four Ball Wear Test (ASTM D-2266) Wear Scar Diameter, mm0.9 max0.32
Compatibility with other greasesNR*excellent
Extreme Pressure, Four Ball Method (ASTM D-2596) Weld Point, kgf200 min400
Extreme Pressure, Four Ball Method (ASTM D-2596) Load Wear Index, kgf 30 min65
High Temperature Life (ASTM D-3527) hours80 min300
Fretting Wear (ASTM D-4170)* mg10 max3.4
Elastomer Compatibility (ASTM D-4289) Volume Change, %, GC-5 to +3021.6
Elastomer Compatibility (ASTM D-4289) Volume Change, %, LB0 to +309.88
Elastomer Compatibility (ASTM D-4289) Hardness Change, durometer-A points, GC+2 to -15-3
Elastomer Compatibility (ASTM D-4289) Hardness Change, durometer-A points, LB0 to -10-6
Leakage (ASTM D-4290), G*10 max6.0
Low Temperature Torque (ASTM D-4693) n·m, max @ -40° C [-40° F]15.52.3
Water Spray Off (ASTM D-4049), % maxNR*22.7
* NR: Not Required for NLGI GC or LB labeling



Jim Hunt - AMSOIL Direct Jobber - 1-866-870-5048

CLICK to Order Factory Direct from the Amsoil Online Store


CLICK For a Price Quote or Place an Order

AMSOIL is 100% "Made proudly in the U.S.A."

St. Louisst.charles mo|st.charles moSpringfieldamsoil missouri|amsoil missouriIndependenceamsoil dealers|amsoil dealersColumbiahydraulic oil st.louis|hydraulic oil st.louisSt. Josephlubricants st.louis|lubricants st.louisOsage Beachsynthetic oil st.louis|synthetic oil st.louisCape Girardeaucertified dealer|certified dealerKansas Citycertified dealer st.louis|certified dealer st.louisJoplinatv oil|atv oilSt. Charles