AMSOIL Saber™ Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP)CLICK For a Price Quote or Place an Order
 AMSOIL Saber™ Professional (ATP) 2 cycle oil is designed for lean mix ratios in two-cycle motors, Saber 2 cycle Oil has excellent lubricity and cleanliness properties to control friction and prevent wear, plug fouling, ring sticking and exhaust port blocking. Package sizes include: - 1.5-oz Pillow Pack - Stock #ATPPK
- 1.5-oz. Pillow Packs, case of 48 - Stock #ATPPK-CA
- 3.5-oz. Bottle - Stock #ATPBA
- 3.5-oz. Bottles, case of 12 - Stock #ATPBA-CA
- 8-oz. Bottle - Stock #ATPBC
- 8-oz. Bottles, case of 12 - Stock #ATPBC-CA
- 1-Quart Bottle - Stock #ATPQT
- 1-Quart Bottles, case of 12 - Stock #ATPQT-CA
- 30-Gallon Drum - Stock #ATP30
- 55-Gallon Drum - Stock #ATPCA
AMSOIL Saber™ Professional Synthetic 100:1 Pre-Mix 2 cycle oil (ATP) is specifically designed for small engines including, but not limited to, chain saws, lawn equipment, blowers, chop saws, pumps, scooters and go-carts. Our 2 cycle engine oil is available in a 3.5- oz. bilingual (English/Spanish) container which is ideal for treating the 2 – 2.5-gallon cans of gas commonly used for storing mixed gas on the job. Saber 2 cycle motor oil is also very good for use in motorcycles, snowmobiles, ATVs, jet boats and personal watercraft. AMSOIL synthetic 2 cycle oil is formulated with high-temperature detergent additives to prevent hard carbon deposits from forming in these hot-operating motors. Saber Professional is “smokeless” and delivers fewer emissions at 100:1 mix ratios than oils mixed at 50:1. Equipment operators subjected to smoke and fumes will benefit from these low emission properties. Because one mix ratio satisfies multiple pieces of equipment, Saber Professional eliminates mix ratio confusion. Saber Professional is recommended for pre-mix where ISO-L-EGD, JASO FD or API TC is specified. Applications
AMSOIL Saber 100:1 2-Cycle Oil is recommended for 100:1 mix ratios in normal service. Richer mix ratios may be used where desired. | 2.6 oz. | per 1 U.S. gallon | 50:1 | | 8 oz. | per 5 U.S. gallons | 80:1 | | 1.3 oz. | per 1 U.S. gallon | 100:1 | | 8 oz. | per 6 U.S. gallons | 100:1 |
| TYPICAL TECHNICAL PROPERTIES AMSOIL Saber™ Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP) | | Kinematic Viscosity @ 100°C, cSt (ASTM D-445) | 13.5 | | Kinematic Viscosity @ 40°C, cSt (ASTM D-445) | 99 | | Viscosity Index (ASTM D-2270) | 136 | | Pour Point °C (°F) (ASTM D-97) | -36 (-33) | | Flash Point °C (°F) (ASTM D-92) | 114 (237) | | Fire Point °C (°F) (ASTM D-92) | 114 (237) | | DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN. |
Jim Hunt - AMSOIL Direct Jobber - 1-866-870-5048CLICK to Order Factory Direct from the Amsoil Online Store
CLICK For a Price Quote or Place an OrderAMSOIL is 100% "Made proudly in the U.S.A." |
|