 Engineered for Outstanding Oil Filtration Efficiency
Package sizes include: - Stock #EaBP90
- Stock #EaBP100
- Stock #EaBP110
Please look at our Amsoil Bypass Units 
AMSOIL bypass oil filters (EaBP) provide the best possible filtration protection against wear and oil degradation. Use with our bypass filter system(s) BMK 11, BMK 12, BMK 13, BMK 15ea, BMK 16ea, BMK17ea. Working in conjunction with the engines full-flow oil filter, the bypass filter system operates by filtering oil on a partial-flow basis. It draws approximately 10 percent of the oil pumps capacity at any one time and traps the extremely small, wear-causing contaminants that full-flow filters cant remove. The AMSOIL bypass oil filter typically filters all the oil in the system several times an hour, so the engine continuously receives analytically clean oil.  By-pass Filtration Benefits
- Dramatically Extended Drain Intervals
- Improved Oil Cooling
- Increased Filtration Capacity and Life
- Increased Fluid System Capacity
- Efficient Small Particle and Soot Removal
- Significantly Extended Engine Life
- Equipment Constantly Runs on Clean Oil
- Increased Engine Efficiency
- Remove Particles Less Than One Micron
Higher Efficiency
AMSOIL Bypass Oil Filters have an efficiency of 98.7 percent at two microns. At normal operating RPMs the EaBP Filter will filter all of the oil in a typical five quart sump in less than 10 minutes. Superior Construction
The superior construction of a AMSOIL bypass oil filter provides better sealing and increased longevity along with superior corrosion resistance. Bypass oil filters have a marine powder coated exterior; and their zinc-dichromate base plates increase rust protection. AMSOIL bypass oil filters have a nitrile HNBR gasket and an orange silicone anti-drain valve. The two stage pleated and layered cellulose/full synthetic media has an efficiency rating of 98.7 percent at two microns. Longer Lasting
When used in conjunction with AMSOIL motor oil, gasoline or diesel and, an AMSOIL EaO or Donaldson Endurance filter, the EaBP should be changed every other full-flow filter change up to 60,000 miles. When used with other brands of motor oil or full-flow filters, the EaBP Filter should be changed every other full-flow filter change. AMSOIL recommends using oil analysis when extending oil drain intervals. Increased Oil Capacity
The increased fluid system capacity and filtration life provides improved oil cooling and ensures that equipment constantly runs on clean oil. Engine efficiency is increased, providing extended engine life. Soot Removal
AMSOIL has designed a new high-efficiency bypass filter element that is also a soot removal device. AMSOIL bypass oil filters use a synthetic cellulose sandwiched media. The inner layer of the element is composed of a highly efficient cellulose media covered with a full synthetic media outer layer. These filters remove 39 percent of soot contaminants less than one micron. Soot removal efficiency increases approximately 10 to 14 percent when the AMSOIL bypass oil filter is used in conjunction with a standard full-flow filter. | AMSOIL Bypass Filter Replacement Chart | | Type of Unit | Stock Number | Size (Approx.) | Additional Oil Needed | Crankcase Capacity | Applications | | SINGLE SPIN-ON ELEMENT (Used with BMK-11 or any DUAL REMOTE SYSTEM) | EaBP-90 | Diam. = 4.5 in.
Height = 6 in.
With Mnt. = 8 in. | 1 qt. | up to 9 qt. | Pleasure Vehicles, Light Trucks and Smaller Commercial Applications | | EaBP-100 | Diam. = 4.5 in.
Height = 8 in.
With Mnt. = 10 in. | 1.5 qt. | up to 15 qt. | | EaBP-110 | Diam. = 4.5 in.
Height = 10 in.
With Mnt. = 12 in. | 2 qt. | up to 21 qt. | | DUAL SPIN-ON ELEMENT (Used with BMK-12 DUAL-GUARD) | (2) EaBP-90's | Diam. = 5 in.
Height = 5.8 in.
With Mnt. = 8 in. | 2 qt. | 15 to 18 qt. | Large Trucks, Construction, Farm and Industrial Equipment (minimum sump capacity = 15 qt.) | | (2) EaBP-100's | Diam. = 5 in.
Height = 7.3 in.
With Mnt. = 10 in. | 3 qt. | 15 to 30 qt. | | (2) EaBP-110's | Diam. = 5 in.
Height = 10.4 in.
With Mnt. = 12 in. | 4 qt. | 15 to 42 qt. | Normal Service Life b:When used in conjunction with AMSOIL motor oil and an EaO or Donaldson Endurance filter, the EaBP should be changed every other full flow filter change up to 60,000 miles. When used with other brands of motor oil or full flow filters, the EaBP filter should be changed every other full flow filter change.AMSOIL recommends using oil analysis when extending oil drain intervals. |
a. Filters can be used on sumps of larger capacity but then require more frequent replacement. Full details on service life included with filter installation instructions.
b. Data determined in a non-turbo gasoline engine with AMSOIL 100% Synthetic Motor Oil, gasoline and diesel and, an AMSOIL Full-Flow Oil Filter. Service life varies in other engines (turbo and diesel) and with other oils and filters. NOTES:
1. Special adapters and hardware may be required for some installations.
2. Contact AMSOIL INC. Technical Service for instructions before installing on vehicles with cast aluminum oil pans. APPLICATIONS: | Vehicles with sump capacities up to and including 15 qts | | Mount | Filter | BMK11 Any sizeAMSOIL Ea Bypass Filter Element
(2004 and newer Dodge pick-ups equipped with Cummins Diesels.) | Any sizeAMSOILEa Bypass Filter Element | | BMK13 | Any size AMSOIL Ea Bypass Filter Element | BMK15Ea Cummins Diesels
(2003 and older Dodges) (complete with filters) | EaO-26 and EaBP-100 Ea Bypass Filter Element | BMK16Ea International Diesels
(complete with filters) | EaO-26 and EaBP-100 Ea Bypass Filter Element | BMK17Ea Duramax Diesels (in GM Pick-ups)
(complete with filters) | EaO-26 and EaBP-100 Ea Bypass Filter Element | | Vehicles with sump capacities greater than 15 qts | | Mount | Filter | | BMK12 Dual Gard | Any size AMSOILEa Bypass
(mount requires 2 filters) |
Jim Hunt - AMSOIL Direct Jobber - 1-866-870-5048CLICK to Order Factory Direct from the Amsoil Online Store
CLICK For a Price Quote or Place an OrderAMSOIL is 100% "Made proudly in the U.S.A." | 
|